After the elastic body of the FA509 shear beam sensor is stressed, what needs to be measured is not its normal stress, but the shear stress caused by the shear force, and the output signal is not affected by the position change of the force measuring point. Good linearity and high precision. The tensile and compressive output sensitivities of the sensor are basically the same, so it is especially suitable for measuring the objects of tension and compression at the same time. Simple structure, easy sealing, good long-term stability and durability.
Specification |
Technique |
Capacity |
0.22,0.55,1.1,1.76,2.2,4.4T |
Sensitivity |
1.94±0.1%mV/V |
Zero balance |
±0.02mV/V |
Non-linearity |
≤0.017%F.S. |
Hysteresis |
≤0.017%F.S. |
Repeatability |
≤0.017%F.S. |
Input impedance |
380±15Ω |
Output impedance |
350±5Ω |
Temp. effect on output |
0.014%F.S./10℃ |
Temp. effect on zero |
0.012%F.S./10℃ |
Insulation resistance |
≥5000MΩ/100V(DC) |
Recommended excitation |
5~15V |
Maximum excitation |
15V |
Compensated temp. range |
-10~60℃ |
Operating temp. range |
-20~80℃ |
Safe overload |
150%F.S. |
Ultimate overload |
200%F.S. |
Cable length |
Φ5.4*1500mm |
Material |
Stainless steel |
Welded seal bending beam load cell are mainly used in various electronic scales, industrial control fields, online control, overload alarm installation, material testing machines and other fields,
such as electronic truck scales, electronic platform scales , electronic forklift, dynamic axle load scale, electronic crane scale, electronic pricing scale, electronic track scale, steel funnel scale, batching scale, filling range, etc.
Name:
Mobile:+86 18921011531
Tel: +86-519-85781529
Whatsapp:8618921011531
Email:nickinfo@fibos.cn
Add:12-1 Xinhui Road, Fengshu Industrial Park, Changzhou, China