FA607 Shaft Dynamic Toque Transducer

Category： Dynamic Rotary Torque Sensor
Capacity: 200,500N.m
Accuracy: ≤0.1%F.S.
Size: optional
Material:Stainless/alloy steel
INQUIRY EMAIL

Product Feature

High detection accuracy, good stability; strong anti-interference;
Small size, light weight, various installation structures, easy to install and use;
Continuous measurement of forward and reverse torque without repeated zero adjustment;
There are no wearing parts such as conductive rings, and it can run at high speed for a long time;
The high-level frequency signal output by the sensor can be directly sent to the computer for processing;
Measure the strength of the elastic body and can withstand 100% overload

Dimension

Load direction

Specification

Specification	Technique
Capacity	200,500N.m
Sensitivity	±15V DC(apply to frequency signal output) 24V DC(apply to voltage/ current signal output)
Torque signal	5~15Khz(amplitude 12V, zero balance 10KHZ) 4~10mA,1~5V,1~10V(optional)
Speed signal	Standard product without encoder, the product length will be increased by 30mm if adding an encoder
Rotate speed range	0~1000,3000,6000,8000 r/m
Accuracy	±0.25%,±0.5%
Stability	0.25%/y
Insulation resistance	≥2000MΩ(100VDC)
Environmental temp.	-20~60℃(customized high-temp. model-~120℃)
Relative humidity	0~90%RH
Overload capacity	150%
Frequency response	200Hz

Application

Dynamic torque sensors are generally used to test occasions where the torque changes drastically, and it is necessary to capture torque or torque peaks, such as screwdrivers, electric wrenches, motor output torque, engine output torque, drill rod torque. In some occasions, because the test object is rotating, the dynamic torque sensor can also rotate for the convenience of testing. It can also be used for the detection of torque and power in sewage treatment systems, the detection of torque and power of fans, water pumps, gearboxes, torque wrenches; laboratories, testing departments, production monitoring and quality control; process industry and process industry.