• 117-2.jpg
  • 117(1).jpg
  • 117-3.jpg

FA117 Annular Hole Force Transducer


Micro Dount Compression Force Sensor

D 75.7mm*H 26mm

Capacity: 10,20,30,50,100,200kN

For customised ranges, accuracy, dimensions and other parameters, please contact us.

Request For Quote

Product Features

FA117 annular hollow force measuring sensor with central control ring press type construction. Can be controlled through the screw by linking to a computer data acquisition storage connected to a terminal such as a PLC.

Small size, low installation height, small deformation, high precision, good long-term stability, and strong anti-bias load capacity.


Technical Specifications

Specification Technical Indicators


Rated Output 1.5±20%mV/V
Zero Balance ±5%F.S
Creep ≤0.1%F.S.
Non-Linearity ≤0.1%F.S.
Hysteresis ≤0.2%F.S.
Repeatability ≤0.1%F.S.
Input Imnpedance 780±20Ω
Output Impedance 700±10Ω
Temp. effect on output 0.05%F.S./10℃
Temp. effect on zero 0.05%F.S./10℃
Insulation Resistance ≥5000MΩ/100V(DC)
Reconnended Excitation 10V
Maximum Excitation 15V
Conpensated Temp Range -10~60℃
Operating Temp Range -20~80℃
Safe Overload 150% F.S.
Ultimate overload 200% F.S.
Cable Size φ4X3000mm
Material Stainless steel

Product Dimensions

Installation size



Load Direction



Wiring Diagram



Accurate measurement with matching display

The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and

convertedto display numerical values or output signals to the upper computer, PLC, etc.





It is suitable for force measurement of screws and rods, bolt pretension test, industrial weighing force measurement, scientific research and development, automation equipment, medical equipment, industrial control system, mechanical experiment and research fields.


Associated instrument





Request For Quote

Register For Download

Kind reminder: Each user downloads once. If you need more information, please contact us