After the elastic body of the FA509 shear beam sensor is stressed, what needs to be measured is not its normal stress, but the shear stress caused by the shear force, and the output signal is not affected by the position change of the force measuring point. Good linearity and high precision. The tensile and compressive output sensitivities of the sensor are basically the same, so it is especially suitable for measuring the objects of tension and compression at the same time. Simple structure, easy sealing, good long-term stability and durability.
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and
convertedto display numerical values or output signals to the upper computer, PLC, etc.
Shear beam load cells can be used in the manufacture of floor scales, pallet scales, belt scales, conveyor scales, tank scales and hopper scales and checkweighers special requirement. Although the shear beam load cell has a certain overload capacity, the overload of the sensor should still be prevented during the installation process. Even short periods of overloading can cause damage. Therefore, when installing, you can first replace the sensor with a pad that is as high as the sensor, and then replace the sensor. In normal operation, the load cell should generally be equipped with overload protection components. If the sensor is fixed with a screw, a certain tightening torque is required, and in order to ensure safety, the screw should have a certain screw-in thread depth.
Request For Quote