+
  • 602B(1).jpg
  • s95.jpg
  • s96.jpg

FA602B Flange-To-Flange Reaction Torque Sensor

FA602B

Static Torque Sensor


D 38mm*H 31.8mm


Capacity: 0.1,0.2,0.5,1,2,3, 5,10N.m

For customised ranges, accuracy, dimensions and other parameters, please contact us.

Request For Quote

Product Features

A torque value suitable for detecting non-rotating objects. The maximum deflection angle is <360 degrees. It can enter the working state after turning on the machine, no preheating process is required.
High detection accuracy, good stability, strong anti-interference.
Positive and negative torque can be continuously measured without repeated zero adjustment.
Small size, light weight, easy to install.
The sensor can be used independently from the secondary instrument, as long as the +24V power supply is provided according to the pin number of the socket, the current, voltage or frequency signal whose impedance is proportional to the torque can be output.

 

Technical Specifications

Specification Technical Indicators
Capacity

0.1,0.2,0.5,1,2,3,5,

10N.m

Rated Output

1.5±10%mV/V

Zero Balance ±2%mV/V
Creep ≤0.05%F.S.
Non-Linearity ≤0.1%F.S.
Hysteresis ≤0.05%F.S.
Repeatability ≤0.05%F.S.
Input Inpedance 350±5Ω
Output Inpedance 350±5Ω
Temp. effect on output 0.05%F.S./10℃
Temp. effect on zero 0.05%F.S./10℃
Insulation Inpendance ≥5000MΩ/100V(DC)
Reconnended Excitation 5~15V
Maximum Excitation 20V
Conpensated Temp Range -10~60℃
Operating Temp Range -20~80℃
Safe Overload 120% F.S.
Ultimate Overload 150% F.S.
Cable Size φ3X3000mm
Material Aluminum alloy
Product Weight 0.3kg

Product Dimensions

Installation size

 

 

Strength mode

 

 

Wiring Diagram

 

 

Accurate measurement with matching display

The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and

convertedto display numerical values or output signals to the upper computer, PLC, etc.

 

 

 

Product Application


Static torque sensors are generally used to test occasions where the torque changes slowly, and the sampling speed is generally lower than 50 times per second, such as testing the static load torque of a manual torque wrench or a transmission. It can also be used for the detection of torque and power in sewage treatment systems, the detection of torque and power of fans, water pumps, gearboxes, torque wrenches; laboratories, testing departments, production monitoring and quality control; process industry and process industry.

 

Associated instrument

Previous

Next

Previous

Next

Request For Quote

Register For Download

Kind reminder: Each user downloads once. If you need more information, please contact us

Submit