• 603-3.jpg
  • 603(1).jpg
  • 603-2.jpg

FA603 Non-Contact Dynamic Torque Sensor


Dynamic Rotary Torque Sensor

Capacity: 5,10,20,50,100,200,500N.m

For customised ranges, accuracy, dimensions and other parameters, please contact us.

Request For Quote

Product Features

It can measure both static torque and rotating torque;
Both static torque and dynamic torque can be measured;
High detection accuracy, good stability; strong anti-interference;
Small size, light weight, various installation structures, easy to install and use;
Continuous measurement of forward and reverse torque without repeated zero adjustment;
There are no wearing parts such as conductive rings, and it can run at high speed for a long time;
The high-level frequency signal output by the sensor can be directly sent to the computer for processing;
Measure the strength of the elastic body and can withstand 100% overload


Technical Specifications

Specification     Technical specifications


Torque output 0±5/10VDC,0~5/10VDC,10±5KHZ,4~20mA,RS485/RS232
Accuracy - % FS ±0.1,0.2
Electricity supply 12-30VDC
Zero point temperature effect - %RO/°C ±0.02
Range temperature influence-%RO/℃
Compensation temperature range-℃ -10~+60
Operating temperature℃ -20~80
Electrical connection 6-pin or 8-pin
Safe Overload -% RO 150
Insulation resistance ≥2000MΩ(100VDC)
Frequency Response 200Hz
Standard cable length
5m(need to be extended when ordering instructions)

Product Dimensions

Installation size



Accurate measurement with matching display

The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and

convertedto display numerical values or output signals to the upper computer, PLC, etc.




Product Application

Dynamic torque sensors are generally used to test occasions where the torque changes drastically, and it is necessary to capture torque or torque peaks, such as screwdrivers, electric wrenches, motor output torque, engine output torque, drill rod torque. In some occasions, because the test object is rotating, the dynamic torque sensor can also rotate for the convenience of testing. It can also be used for the detection of torque and power in sewage treatment systems, the detection of torque and power of fans, water pumps, gearboxes, torque wrenches; laboratories, testing departments, production monitoring and quality control; process industry and process industry.


Associated instrument





Request For Quote

Register For Download

Kind reminder: Each user downloads once. If you need more information, please contact us