• 606(1).jpg
  • g124.jpg
  • g125.jpg

FA606 Shaft to Shaft Dynamic Torque Transducer


Dynamic Rotary Torque Sensor

Capacity: 5~5000N.m

For customised ranges, accuracy, dimensions and other parameters, please contact us.

Request For Quote

Product Features

It can measure both static torque and rotating torque;
Both static torque and dynamic torque can be measured;
High detection accuracy, good stability; strong anti-interference;
Small size, light weight, various installation structures, easy to install and use;
Continuous measurement of forward and reverse torque without repeated zero adjustment;
There are no wearing parts such as conductive rings, and it can run at high speed for a long time;
The high-level frequency signal output by the sensor can be directly sent to the computer for processing;
Measure the strength of the elastic body and can withstand 100% overload


Technical Specifications

Specification Technical Indicators
Nominal range


Output signal

5~15Khz/4-20mA/0-5 or 10V

RPM range

0~8000 rpm

Zero output ±2%mV/V
Nonlinear ≤0.3%F.S.
Lag ≤0.5%F.S.
Repeatability ≤0.2%F.S.
Insulation resistance ≥2000MΩ/100V(DC)
Excitation voltage

±15VDC (frequency signal)

24VDC (voltage, current signal)

Operating Temperature Range -20~60℃
Safe Overload 150% F.S.
Ultimate overload 200% F.S.
Cable Wire Size 3m
Protection class IP66
Relative humidity 0-90%RH

Product Dimensions

Installation size



Load Direction



Wiring Diagram



Accurate measurement with matching display

The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and

convertedto display numerical values or output signals to the upper computer, PLC, etc.




Product Application

Dynamic torque sensors are generally used to test occasions where the torque changes drastically, and it is necessary to capture torque or torque peaks, such as screwdrivers, electric wrenches, motor output torque, engine output torque, drill rod torque. In some occasions, because the test object is rotating, the dynamic torque sensor can also rotate for the convenience of testing. It can also be used for the detection of torque and power in sewage treatment systems, the detection of torque and power of fans, water pumps, gearboxes, torque wrenches; laboratories, testing departments, production monitoring and quality control; process industry and process industry.


Associated instrument





Request For Quote

Register For Download

Kind reminder: Each user downloads once. If you need more information, please contact us