Views: 222 Author: Leah Publish Time: 2025-03-23 Origin: Site
Content Menu
>> Step 1: Remove the Mirror Glass
>> Step 2: Disassemble the Mirror Housing
>> Step 3: Access the Turn Signal Assembly
>> Step 4: Replace the Turn Signal Indicator
>> Step 5: Reassemble the Mirror
>> Broken Clips
>> Choosing the Right Replacement Parts
>> DIY vs. Professional Repair
● FAQ
>> 1. What tools do I need to replace the side mirror turn signal indicator?
>> 2. How do I access the turn signal assembly in the mirror?
>> 3. Can I replace just the bulb if the turn signal is not working?
>> 4. What if I encounter moisture damage during the replacement process?
>> 5. Are there any specific precautions I should take during the replacement process?
Replacing the side mirror turn signal indicator on a VW Jetta is a relatively straightforward process that can be accomplished with basic tools and some patience. This guide will walk you through the steps to replace the turn signal indicator, including tips and tricks to make the process smoother.
Before starting, ensure you have the correct replacement parts. The turn signal indicator is usually a small LED or bulb assembly located within the side mirror housing. You can purchase these from auto parts stores or online retailers like Amazon or AliExpress.
- Torx screwdriver (T20 or T25 depending on the model)
- Flathead screwdriver
- Pliers (for removing clips)
- New turn signal indicator assembly
First, you need to remove the mirror glass to access the inner workings of the mirror. This is typically held in place by clips or screws.
1. Remove the Mirror Glass: Gently pry the glass away from the mirror housing. It may be secured with clips or adhesive, so be careful not to break it.
2. Disconnect the Mirror Adjuster: If your mirror is power-adjustable, you'll need to disconnect the adjuster cables. This usually involves releasing a small clip or connector.
Now, you'll need to remove the outer cover of the mirror to access the turn signal assembly.
1. Remove the Screws: Use a Torx screwdriver to remove the screws holding the mirror cover in place. For most VW models, this will be a T20 Torx.
2. Remove the Cover: Gently pull the cover away from the mirror housing. It may be clipped in place, so use a flathead screwdriver to release any clips.
With the cover removed, you should see the turn signal assembly.
1. Locate the Turn Signal: Identify the turn signal assembly, which is usually attached with screws or clips.
2. Disconnect the Wiring: Carefully disconnect the wiring harness from the turn signal assembly. This may require a bit of force, but be gentle to avoid damaging the wires.
Now it's time to replace the old turn signal with the new one.
1. Remove the Old Assembly: Take out the screws or clips holding the old turn signal in place and remove it.
2. Install the New Assembly: Mount the new turn signal assembly in the reverse order of how you removed the old one. Ensure it's securely fastened with screws or clips.
3. Reconnect the Wiring: Connect the wiring harness to the new turn signal assembly. Make sure all connections are secure to prevent any issues.
Once the new turn signal is installed, reassemble the mirror in the reverse order of how you disassembled it.
1. Replace the Mirror Cover: Put the mirror cover back on and secure it with the Torx screws.
2. Reconnect the Adjuster Cables: If applicable, reconnect the power adjuster cables.
3. Replace the Mirror Glass: Carefully place the mirror glass back into its housing, ensuring it's securely clipped or screwed in place.
- Use Protective Gear: Wear gloves and safety glasses to protect yourself from any sharp edges or debris.
- Consult a Manual: If you're unsure about any part of the process, consult a repair manual specific to your VW Jetta model.
- Test the Signal: Before fully reassembling the mirror, test the turn signal to ensure it's working correctly.
Moisture can enter the mirror housing and damage the turn signal assembly. To prevent this, ensure all seals are intact when reassembling the mirror. If you find moisture, use a soft cloth to dry the area before reassembly.
If any clips are broken during disassembly, you can purchase replacement clips from auto parts stores or use adhesive to secure parts temporarily.
If the turn signal doesn't work after replacement, check the wiring connections to ensure they are secure and not damaged. Also, verify that the new assembly is compatible with your vehicle's electrical system.
For a visual guide, you can refer to videos on YouTube that demonstrate the replacement process for similar models like the VW Golf or Passat, as the steps are often similar.
- Video 1: How to Change Mirror Signal VW Volkswagen - This video shows how to replace the signal on the mirror of a Volkswagen Golf, which is similar to the Jetta.
- Video 2: How to install VW Golf MK6, Plus, GTI, Passat, Jetta, Touran dynamic blinker side mirror indicator - This video provides a detailed guide on installing dynamic blinkers, which can be helpful for understanding the mirror's internal components.
Ensure that the replacement turn signal indicator is compatible with your vehicle's model and year. Some models may have specific requirements for LED or bulb types.
Regularly inspect the mirror housing for signs of moisture or damage. This can help prevent future issues with the turn signal assembly.
While replacing the turn signal indicator is a DIY-friendly task, if you're not comfortable with the process or encounter complications, consider consulting a professional mechanic.
Replacing the side mirror turn signal indicator on a VW Jetta is a manageable DIY project. With the right tools and a bit of patience, you can save money by doing it yourself. Always ensure that all electrical connections are secure to prevent future issues.
You will need a Torx screwdriver (T20 or T25), a flathead screwdriver, pliers for removing clips, and a new turn signal indicator assembly.
To access the turn signal assembly, you need to remove the mirror glass and then disassemble the mirror housing by removing the screws and clips that hold it in place.
In most cases, you cannot replace just the bulb. The turn signal assembly is usually a complete unit that needs to be replaced if it's not working.
If you find moisture damage, ensure all seals are intact when reassembling the mirror. You may also need to dry out the area or replace damaged components.
Yes, wear protective gear like gloves and safety glasses. Also, ensure all electrical connections are secure to prevent future issues.
[1] https://www.youtube.com/watch?v=RI1rPg-3bq4
[2] https://www.youtube.com/watch?v=SM0ov8-pydY
[3] https://forums.tdiclub.com/index.php?threads%2Fside-mirror-blinker-bulb-replacement.378983%2F
[4] https://www.youtube.com/watch?v=VlM9MtBocp4
[5] https://www.youtube.com/watch?v=-ZXv5u6_RiA
[6] https://www.youtube.com/watch?v=SzuD2gHjkJA
[7] https://www.youtube.com/watch?v=qx5VgOpBrLM
[8] https://www.youtube.com/watch?v=pix7HIclR-4
[9] https://forums.tdiclub.com/index.php?threads%2Fdriver-side-mirror-turn-signal-indicator-light.427496%2F
[10] https://www.walmart.com/c/kp/vw-jetta-side-mirror-bulb
[11] https://shop.advanceautoparts.com/find/volkswagen-jetta-door-mirror-turn-signal-lights
[12] https://www.aliexpress.com/w/wholesale-vw-jetta-mirror-turn-signal.html
[13] https://www.walmart.com/c/kp/jetta-side-mirror-turn-signal-replacement
[14] https://parts.vw.com/p/Volkswagen_2015_Jetta/Turn-Signal-Light-Assembly/62796846/1K8949101.html
[15] https://www.reddit.com/r/jetta/comments/1ait7ly/jetta_mk6_2015_turn_signal_upgrade/
[16] https://www.pinterest.com/pin/for-0510-vw-jetta-oe-style-poweredheatedturn-signal-driver-left-side-mirror--101049585383789634/
content is empty!
Contact:
Phone: +86 18921011531
Email: nickinfo@fibos.cn
Add: 12-1 Xinhui Road, Fengshu Industrial Park, Changzhou, China