Russia  Russia
You are here: Home » Blog

News and Events

  • 2026-11-16

    Compare ten load cell manufacturers in China for industrial weighing and OEM force measurement in 2026. This guide explains how to match load cell types to equipment, verify mounting and signal compatibility, check calibration documentation, prepare an RFQ, and validate samples before ordering.
  • 2026-11-16

    The FIBOS FA115 through-hole load cell measures axial compression in suitable bolted joints and tooling. This article explains how to verify clamp force during tightening, track preload loss during wind turbine operation, and evaluate force and stroke monitoring for blind rivet installation.
  • 2026-11-13

    FIBOS has completed 400-tonne calibration for FA4249 and 700-tonne calibration for FA4250. Learn how force calibrators support prestressing jack verification, what the stated calibration levels mean, and which mechanical, measurement, and integration conditions engineers should check when evaluating these models.
  • 2026-11-11

    Piezoelectric force sensors capture dynamic and quasi-static forces when the sensor, mounting, and electronics are correctly matched. Learn how force washers, axial sensors, and three-axis designs differ, and how preload, charge amplifiers, calibration, and measurement duration affect reliable selection and integration.
  • 2026-11-11

    FIBOS has completed third-party calibration of its FA4221-10MN force sensor up to 10,000 kN. Explore the compression test procedure, traceable calibration results, and practical integration considerations for engineers evaluating high-capacity load cells for heavy-load measurement projects, equipment integration, and structural testing applications.
  • 2026-11-09

    Load cells convert applied force into a measurable signal for industrial weighing and force testing. This guide explains how strain gauge load cells work and compares eight types, including single point, shear beam, S-beam, column, and load pin designs. It shows how to size capacity for uneven loading, evaluate error at small loads, and match wiring to an indicator or data acquisition system. It also covers installation, calibration, and the checks needed when replacing a load cell in an existing system.
  • 2026-11-09

    Column force sensors, also called column load cells, measure axial force in presses, test fixtures, and industrial weighing systems. This guide compares compact threaded tension and compression sensors with high capacity compression and canister designs. It explains how to select a capacity based on working and peak loads, check error at low forces, and prevent mounting errors caused by eccentric loading or screws bottoming out. It also covers bridge output, excitation, checks after installation, and what to compare when replacing an existing sensor.
  • 2026-11-06

    This guide compares ten force sensor manufacturers for buyers in Indonesia, covering load cells, piezoelectric force sensors, multi-axis transducers, and custom OEM designs. It explains how to match a sensor to the load path, working range, and controller input, and how to verify local or cross-border supply, spare parts, and recalibration. A replacement workflow shows how to compare drawings and wiring, trial-fit a sample, and test it under known loads. An RFQ checklist helps buyers request comparable quotes for an Indonesian project.
  • 2026-11-06

    Compare 15 force sensor manufacturers for buyers in Germany, including suppliers of miniature load cells, industrial force transducers, piezoelectric sensors, and multi-axis force and torque sensors. Match sensor types to press monitoring, low-force testing, robotics, web tension, or weighing. Follow the replacement checklist to verify mechanical fit, load range, signal compatibility, and installed readings. Before ordering, use the guide to check accredited calibration scope, German or EU spare stock, return and recalibration routes, and delivery terms for shipments from outside the EU.
  • 2026-11-06

    Inline tension and compression force sensors, also called inline load cells, measure axial push and pull forces in linear actuators, press-fit stations, and test fixtures. This guide explains how a threaded inline load cell works, compares it with S-beam and donut designs, and shows how to match threads, installed length, capacity, and accuracy to the application. It covers side loads and bending moments, PLC or DAQ connection, two-direction calibration, a selection checklist, and what to compare when replacing an existing sensor.
  • Total 16 pages  Go to Page
  • Go

Precision Force Sensing

— Engineered for Stability, Calibrated for Accuracy.

Custom designs • Technical Support • Rapid Response
Contact us
Products
Applications
Why Fibos
Links
© COPYRIGHT 2026 FIBOS MEASUREMENT TECHNOLOGY (CHANGZHOU) CO., LTD. ALL RIGHTS RESERVED.